Free sewing tool

Bias Tape Calculator: Square Size And Bias Tape Length

A square makes side × side ÷ strip width of continuous bias tape: a 20 in square cut into 2 in strips gives about 200 in, and 60 in of 2 in tape needs an 11 in square. Enter your square or the length you need below.

Method verified November 8, 2026 · Free · No sign-up · Runs in your browser

The width you cut, before folding.

20 in square · 2 in strips

Continuous bias tape

200 in of bias tape

A 20 in square cut into 2 in continuous bias strips makes about 200 in of bias tape (508 cm, 5.56 yd).

Bias tape200 in
In cm508 cm
Strip width2 in
Diagonal strips≈ 15

Seams and the offset of the continuous loop use some length, so add 10–15 in (25–40 cm) to what you need.

How the bias tape calculator works

  1. Length from a square: Bias tape length = square side × square side ÷ cut strip width.
  2. Square for a length: Square side needed = √(length needed × cut strip width), rounded up.
  3. Allow extra: Seams and the offset of the continuous loop use some length, so add 10–15 in (25–40 cm) to what you need.

Bias tape yield chart

Continuous bias tape from a square (inches)
Square1.5 in strips2 in strips2.5 in strips
12 × 12 in96 in72 in57.6 in
15 × 15 in150 in112.5 in90 in
18 × 18 in216 in162 in129.6 in
20 × 20 in266.7 in200 in160 in
24 × 24 in384 in288 in230.4 in
30 × 30 in600 in450 in360 in
36 × 36 in864 in648 in518.4 in

Seams and the offset of the continuous loop use some length, so add 10–15 in (25–40 cm) to what you need.

Sources and method

Frequently asked questions

How much bias tape does a square make?

Multiply the square's side by itself and divide by the cut strip width. A 20 in square cut into 2 in strips makes about 200 in (5.56 yd) of continuous bias tape.

What size square do I need for bias tape?

Multiply the length you need by the strip width and take the square root. 60 in of 2 in bias tape needs a 11 in square; 200 in plus 15 in extra needs a 21 in square.

How much bias tape from a fat quarter?

A fat quarter is about 18 × 22 in, so the largest square is 18 in: 18 × 18 ÷ 2 = 162 in of 2 in strips, or 216 in of 1.5 in strips.

What width should I cut bias strips?

Cut double-fold binding for quilts about 2¼–2½ in wide; for bias tape made with a tape maker, cut the width the maker asks for, usually twice the finished width. Enter the cut width, before folding.

How much bias tape in centimeters?

The same formula works in centimeters: a 50 cm square cut into 5 cm strips makes about 500 cm (5 m).

Why is my bias tape shorter than calculated?

The formula gives the full area of the square. Joining the tube, the offset at each end and trimming use a little, so add 10–15 in (25–40 cm) to the length you need.

Why cut fabric on the bias?

Strips cut at 45° to the grain stretch and curve smoothly around necklines, armholes and rounded quilt corners without puckering.